Ridley Fenix: First impressions

Gifted myself this for my 27th.

Spec:
What's new:
Ridley Fenix frameset (size M)
SRAM Apex groupset
53/39, 170mm
12-23 Ultegra cassette
Deda RHM02 handlebars - 42mm
Deda Zero1 stem - 110mm
Lizard skins tape

From my old bike:
Wheels - Kinlin XR380s with Novatec hubs (20/24)
Ultremo/Durano 23mm tyres
105 Pedals
Selle Italia SLR Team Edition saddle

Weighs 8.2kg with pedals. That's more than 4kgs lighter than my KHS (Flite 220). The WW in me was secretly hoping for a sub 8kg build. Oh well.

First impressions first: feels solid, comfort like steel (seriously), accelerates better, SRAM shifting is cool, internal cable routing is neat.

Frame:
Ridley's bike for the classics - Lotto Belisol rode it for this year's classics. Supposedly mixes the good things of both the Damocles and the Excalibur. Has tubes shaped like the Damocles but is a monocoque construction like the Excalibur. Absolutely doesn't matter at my level but just saying. Internal routing, compatible with electronic and mechanical groups. Weighed 1200g. The fork weighed 400g uncut.

Fit:
I could replicate the exact position from my old bike. But I still could go 1.5cm lower here which wasn't possible on the old one. Still fiddling with the stem height to figure out the lowest point I can get comfortable with. Riding it slammed for now and I feel alright. I'm a sucker for speed. I'll give up comfort if I can to go even a little bit faster. Plus, when I'm out of the saddle, I like it better when the handlebars are lower. A small negative though is that the inner part of my thighs touch the TT sometimes because the TT is fat. Not a big problem right not though. Losing fat should solve it.

Ride:
Like steel. Really. I'm honestly a little disappointed that it rides exactly like my old bike. I was looking forward to a more lively ride. Might be a good thing on poor roads and long rides though.

Performance:
I've ridden a little over 300k so far and all I know is that it accelerates better and does it even better when out of saddle. I'm guessing that's because of it being stiffer. I also noticed a strange thing - at speeds over 30-35, it seemed to me that I needed to put in lesser effort to maintain it. It could be completely a placebo effect though.

I was hoping that I would notice an earth-shattering difference between my entry-level steel road bike and this. Sadly, I don't. However, this could be due to a couple of reasons - different gearing and shorter crank arms.

I'd probably be in a better position to judge after riding more and getting more used to it. But if you ask me now, I'd have made different choices -
1) a 12-25 or a 12-27 (or even a 11-28. see 3) cassette instead of 12-23. I thought I'd prefer close gears but turns out I'm too lazy to shift too often, LOL.
2) crank arm length of 172.5 instead of 170 (this wasn't a decision. I just didn't notice when it was being installed. Noticed only after I got the bike back home. Thought I might as well give it a try, was always curious anyway). The 170 gives me a extra avg cadence of 3 or 4 on my usual rides though without any extra effort whatsoever.
3) Since I'm going to be riding the TfN and knowing how pathetic a climber I am, I probably should have gotten a compact. But as I said I'm a sucker for speed and was used to a 52/42 front from my old bike. I still got the standard. Would have been slightly better if I had gotten the 172.5 instead of 170.
4) Black tape instead of white (although to be fair, it was bought with another bike in mind)

I got a PR on my regular 15km segment. So the carbon may be doing something. Or I might have just learned to pace myself a little better. Donno.

Handling:
Feels solid and well mannered. Never understood what people meant when they talked about "a solid front end" but I think I now know. Did some short descents today on Sharath's Road today and I felt quite confident going into corners at 40kmph (had never done that before).

Shifting:
Coming from a 2300 setup, this is great. Took me very little time to get used to the double tap mechanism. I like it. A small crib is that the downshift throw is longer than Shimano's. A bigger crib is that I get chain rub when in 39-13 and 39-12 no matter how much I fiddle with the FD. A little irritating. Shifting is noisier but I don't have a problem with that. Btw, had to tweak the FD 3 times in 6 rides. I touched the FD on my 2300 those many times in 3 years. I'm perhaps doing something wrong or I probably just have to wait for cables to stretch as much as they will and then adjust it. I also had the chain come off a few times when I shifted to the small chainring. So I have to limit the FD movement even more - more chain rub, yay.

Braking:
Fantastic. I now realize how poor the braking was on my old bike.

Upgrades planned:
1. Will temporarily swap a compact crankset for TfN and get a 11-28 cassette or get a med. cage RD to accommodate a 12-32. Haven't decided yet.
2. Wheels. If I lose enough weight (10kg) before TfN, I'm going to gift myself a wheelset. RS81 C24/C35 or DA9000 C24/C35. Can get RS80s for cheaper but they won't work with 11sp ;-)

Okay, some pictures here.